-工单物料配置表

admin

6 天以前 18cb51817380016c4024f9f462ea91b57bfa40f9

 jcdm-main/src/main/java/com/jcdm/main/plcserver/sub/OPCUaSubscription.java

@@ -121,16 +121,22 @@
                    Integer scanResult = 11;
                    if (Constants.OP010.equals(device)){
                        //OP010工位电芯条码校验||OP030工位电芯条码校验
                        Object value1 = miloService.readFromOpcUa(thoroughfare + "." + device + ".Scaner").getValue();
                        if (ObjectUtil.isNotNull(value1)){
                            String keyCode = value1.toString();
                            log.info("读取到工位{}的Scaner数据：{}",device,keyCode);
                            //仅校验长度是否合格
//                                List<KeyCodeCheck> collect = keyCodeCheckService.list().stream().filter(x -> x.getKeyCode().contains(keyCode)).collect(Collectors.toList());
//                                if (CollUtil.isNotEmpty(collect)){
//                                    scanResult = 11;
//                                }
                        }
                        //电芯批次校验
//                        Object value1 = miloService.readFromOpcUa(thoroughfare + "." + device + ".Scaner").getValue();
//                        Object value2 = miloService.readFromOpcUa(thoroughfare + "." + device + ".Batch").getValue();
//                        if (ObjectUtil.isNotNull(value1)&&ObjectUtil.isNotNull(value2)){
//                            String keyCode = value1.toString();
//                            String batch = value2.toString();
//                            log.info("读取到工位{}的Scaner数据：{} 校验批次为：{}",device,keyCode,batch);
//                            //仅校验长度是否合格
////                                List<KeyCodeCheck> collect = keyCodeCheckService.list().stream().filter(x -> x.getKeyCode().contains(keyCode)).collect(Collectors.toList());
////                                if (CollUtil.isNotEmpty(collect)){
////                                    scanResult = 11;
////                                }
//                            scanResult = batchVerification(keyCode,batch);
//                        }else {
//                            scanResult = 12;
//                        }
                    }else if(Constants.OP030.equals(device)){
                        Object value1 = miloService.readFromOpcUa(thoroughfare + "." + device + ".Scaner").getValue();//电芯码
                        if (ObjectUtil.isNotNull(value1)){
@@ -161,15 +167,15 @@
                    //OP020 电芯挡位校验
                    if (Constants.OP020.equals(device)){
                        Integer result = 11;
                        Object cellGearObjcet = miloService.readFromOpcUa(thoroughfare + "." + device + ".CellGear").getValue();
                        if (ObjectUtil.isNull(cellGearObjcet)){
                            result = 16;//电芯挡位为空
                        }else{
                            String cellGear = cellGearObjcet.toString();
                            List<String> cellCodeList = readCellCodeList(thoroughfare, device);
                            result = checkCellGear(thoroughfare, device,cellCodeList,cellGear);//校验电芯挡位和组别
                            Constants.OLD_CELL_GEAR = cellGear;//挡位赋值
                        }
//                        Object cellGearObjcet = miloService.readFromOpcUa(thoroughfare + "." + device + ".CellGear").getValue();
//                        if (ObjectUtil.isNull(cellGearObjcet)){
//                            result = 11;//如果电芯挡位为空，不进行挡位校验
//                        }else{
//                            String cellGear = cellGearObjcet.toString();
//                            List<String> cellCodeList = readCellCodeList(thoroughfare, device);
//                            result = checkCellGear(thoroughfare, device,cellCodeList,cellGear);//校验电芯挡位和组别
//                            Constants.OLD_CELL_GEAR = cellGear;//挡位赋值
//                        }
                        miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(result).build());

                    }else if (Constants.OP030.equals(device)){
@@ -246,7 +252,7 @@
                                return;
                            }

                            result = savePassingStation(thoroughfare, device,cellCodeList);//保存过站
                            //result = savePassingStation(thoroughfare, device,cellCodeList);//保存过站
                            if(result == 21) {
                                if(Constants.OP020.contains(device)){
                                    if(!cellCode1.isEmpty()){
@@ -295,7 +301,7 @@
                            Object stationStatusObjcet = miloService.readFromOpcUa(thoroughfare + "." + device + ".StationStatus").getValue();//站状态地址
                            if (ObjectUtil.isNotNull(stationStatusObjcet)){
                                String stationStatus = stationStatusObjcet.toString();
                                result = savePassingStation(thoroughfare, device,moduleCode,stationStatus);//保存过站
                                //result = savePassingStation(thoroughfare, device,moduleCode,stationStatus);//保存过站
                                if(result == 21) {
                                    result = saveParamCollection(device,moduleCode,stationStatus);//保存参数，发送工厂MES
                                }
@@ -1179,5 +1185,23 @@
        }
    }

    /**
     * 批次校验
     * @param keyCode,batch
     * @return list
     */
    public Integer batchVerification(String keyCode,String batch){
        Integer result = 11;
        List<DaCellData> cellDataList = daCellDataService.list(new LambdaQueryWrapper<DaCellData>()
                .eq(DaCellData::getGbCellCode, keyCode)
                .eq(DaCellData::getCellSerial, batch)
        );
        if(cellDataList.isEmpty()){
            result = 13;
            log.info("电芯码{} 工位010校验批次失败：批次为{}",keyCode,batch);
        }
        return result;
    }


}