修改参数采集

cl

2024-07-08 e4f9cb3d30a5ba10f4f6390facef7cd23b610cee

 jcdm-main/src/main/java/com/jcdm/main/plcserver/sub/OPCUaSubscription.java

@@ -90,143 +90,143 @@
                String device = nodes[1];//设备
                String tab = nodes[2];//标记
                String valueString = value.toString();//地址值
                if (Constants.RECORD_CHECK_CODE.equals(tab)){//电芯校验
                    if (Constants.ONE.equals(valueString)){
                        Integer scanResult = 11;
                        if (Constants.OP010.equals(device)){
                            //OP010工位电芯条码校验||OP030工位电芯条码校验
                            Object value1 = miloService.readFromOpcUa(thoroughfare + "." + device + ".Scaner").getValue();
                            if (ObjectUtil.isNotNull(value1)){
                                String keyCode = value1.toString();
                                log.info("读取到工位{}的Scaner数据：{}",device,keyCode);
                                //仅校验长度是否合格

                CompletableFuture<Void> cp1 = CompletableFuture.runAsync(() -> {
                    subHandle(thoroughfare,device,tab,valueString);
                });

            }
        } catch (Exception e) {
            log.error(e.getMessage());
        }
    }

    public void subHandle(String thoroughfare,String device,String tab,String valueString){
        try{
            if (Constants.RECORD_CHECK_CODE.equals(tab)){//电芯校验
                if (Constants.ONE.equals(valueString)){
                    Integer scanResult = 11;
                    if (Constants.OP010.equals(device)){
                        //OP010工位电芯条码校验||OP030工位电芯条码校验
                        Object value1 = miloService.readFromOpcUa(thoroughfare + "." + device + ".Scaner").getValue();
                        if (ObjectUtil.isNotNull(value1)){
                            String keyCode = value1.toString();
                            log.info("读取到工位{}的Scaner数据：{}",device,keyCode);
                            //仅校验长度是否合格
//                                List<KeyCodeCheck> collect = keyCodeCheckService.list().stream().filter(x -> x.getKeyCode().contains(keyCode)).collect(Collectors.toList());
//                                if (CollUtil.isNotEmpty(collect)){
//                                    scanResult = 11;
//                                }
                            }
                        }else if(Constants.OP030.equals(device)){
                            Object value1 = miloService.readFromOpcUa(thoroughfare + "." + device + ".Scaner").getValue();
                            if (ObjectUtil.isNotNull(value1)){
                                String cellCode = value1.toString();
                                //反馈电芯ocv检测结果
                                boolean b = OCVResultFeedBack(thoroughfare, device,cellCode);
                                //四个电芯的状态
                                if (b){
                                    scanResult = 11;
                                }else {
                                    scanResult = 12;
                                }
                        }
                    }else if(Constants.OP030.equals(device)){
                        Object value1 = miloService.readFromOpcUa(thoroughfare + "." + device + ".Scaner").getValue();
                        if (ObjectUtil.isNotNull(value1)){
                            String cellCode = value1.toString();
                            //反馈电芯ocv检测结果
                            boolean b = OCVResultFeedBack(thoroughfare, device,cellCode);
                            //四个电芯的状态
                            if (b){
                                scanResult = 11;
                            }else {
                                scanResult = 12;
                            }

                        }else {
                            scanResult = 12;
                        }
                        miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".ScanerResult1").value(scanResult).build());
                        log.info("写入到工位{}的ScanerResult1数据：{}",device,scanResult);
                    }
                }else if (Constants.RECORD_SN.equals(tab)){//求下发模组码请9
                    if (Constants.ONE.equals(valueString)){
                        miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordSNDone").value(1).build());//没有要生产的工单
                    }
                }else if (Constants.RECORD_DATA.equals(tab)){//出入站
                    if (Constants.ONE.equals(valueString)){//入站
                        //1:告知MES托盘已到站，请求下发进站状态
                        if (Constants.OP030.equals(device)){
                            //反馈电芯ocv检测结果
                            boolean b = OCVResultFeedBack(thoroughfare, device);
                            //四个电芯的状态
                            if (b){
                                miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(11).build());
                                log.info("写入到工位{}的RecordDataDone数据：{}",device,11);
                            }else {
                                miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(12).build());
                                log.info("写入到工位{}的RecordDataDone数据：{}",device,12);
                            }
                        } else if(Constants.OP100_1.equals(device) || Constants.OP100_2.equals(device)){
                            //1、进站PLC给产品类型，MES读取产品类型
                            Object productTypeObjcet = miloService.readFromOpcUa(thoroughfare + "." + device + ".ProductType").getValue();//产品类型
                            if (ObjectUtil.isNotNull(productTypeObjcet)){
                                String productType = productTypeObjcet.toString();//产品类型
                                CompletableFuture<Void> cp1 = CompletableFuture.runAsync(() -> {
                                    //调用工厂MES，保存到数据库,并且将工单传给PLC (目前临时用该方法）
                                    receivingWorkOrders(thoroughfare, device);
                                });

                                miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(11).build());
                                log.info("写入到工位{}的RecordDataDone数据：{}",device,11);
                            }else{
                                miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(12).build());
                            }

                        }else if (Constants.ModuleList.contains(device)){//有模组码的工位
                            Object modulCodeObjcet = miloService.readFromOpcUa(thoroughfare + "." + device + ".ModuleCode").getValue();
                            if (ObjectUtil.isNull(modulCodeObjcet)){
                                miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(12).build());
                            }else{
                                miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(11).build());
                            }
                        }
                        else {
                    miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".ScanerResult1").value(scanResult).build());
                    log.info("写入到工位{}的ScanerResult1数据：{}",device,scanResult);
                }
            }else if (Constants.RECORD_SN.equals(tab)){//求下发模组码请9
                if (Constants.ONE.equals(valueString)){
                    miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordSNDone").value(1).build());//没有要生产的工单
                }
            }else if (Constants.RECORD_DATA.equals(tab)){//出入站
                if (Constants.ONE.equals(valueString)){//入站
                    //1:告知MES托盘已到站，请求下发进站状态
                    if (Constants.OP030.equals(device)){
                        //反馈电芯ocv检测结果
                        boolean b = OCVResultFeedBack(thoroughfare, device);
                        //四个电芯的状态
                        if (b){
                            miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(11).build());
                            log.info("写入到工位{}的RecordDataDone数据：{}",device,11);
                        }else {
                            miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(12).build());
                            log.info("写入到工位{}的RecordDataDone数据：{}",device,12);
                        }
                    }else if (Constants.TWO.equals(valueString)){//出站
                        //分段010-065段
                        if (Constants.OP010.equals(device)){
                            //010工位无过站记录，只给放行信号
                            miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(21).build());
                            log.info("写入到工位{}的RecordDataDone数据：{}",device,21);
                        }else if (Constants.OP020_OP090.contains(device)){
                            Integer result = 21;
                            //读取电芯码
                            List<String> cellCodeList = readCellCodeList(thoroughfare, device);
                            if(ObjectUtil.isNull(cellCodeList) || cellCodeList.size() != 4){
                                result = 23;
                            }else{
                                result = savePassingStation(thoroughfare, device,cellCodeList);//保存过站
                                if(result == 21) {
                                    result = saveParamCollection(thoroughfare, device,cellCodeList);//保存参数，发送工厂MES
                                }
                            }
                            miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(result).build());
                            log.info("写入到工位{}的RecordDataDone数据：{}",device,result);
                        } else if (Constants.OP100_OP150.contains(device)){//人工工位
                            WebSocketUsers.sendMessageToUserByText(map.get(device), "END");
                        } else {
                            Integer result = 21;
                            Object productTypeObjcet = miloService.readFromOpcUa(thoroughfare + "." + device + ".ProductType").getValue();//产品类型
                            Object modulCodeObjcet = miloService.readFromOpcUa(thoroughfare + "." + device + ".ModuleCode").getValue();
                            if (ObjectUtil.isNull(modulCodeObjcet)){
                                result = 23;
                            }else{
                                String moduleCode = modulCodeObjcet.toString();
                                result = savePassingStation(thoroughfare, device,moduleCode);//保存过站
                                if(result == 21) {
                                    result = saveParamCollection(thoroughfare, device,moduleCode);//保存参数，发送工厂MES
                                }
                            }
                            miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(result).build());
                            log.info("写入到工位{}的RecordDataDone数据：{}",device,result);
                    } else if(Constants.OP100_1.equals(device) || Constants.OP100_2.equals(device)){
                        //1、进站PLC给产品类型，MES读取产品类型
                        Object productTypeObjcet = miloService.readFromOpcUa(thoroughfare + "." + device + ".ProductType").getValue();//产品类型
                        if (ObjectUtil.isNotNull(productTypeObjcet)){
                            String productType = productTypeObjcet.toString();//产品类型
                            CompletableFuture<Void> cp1 = CompletableFuture.runAsync(() -> {
                                //调用工厂MES，保存到数据库,并且将工单传给PLC (目前临时用该方法）
                                receivingWorkOrders(thoroughfare, device);
                            });

                            miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(11).build());
                            log.info("写入到工位{}的RecordDataDone数据：{}",device,11);
                        }else{
                            miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(12).build());
                        }

                    }else if (Constants.ModuleList.contains(device)){//有模组码的工位
                        Object modulCodeObjcet = miloService.readFromOpcUa(thoroughfare + "." + device + ".ModuleCode").getValue();
                        if (ObjectUtil.isNull(modulCodeObjcet)){
                            miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(12).build());
                        }else{
                            miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(11).build());
                        }
                    }
                }  /*else if (Constants.RECORD_CHECK_CODE_1.equals(tab)) {
                    if (Constants.OP100_1.equals(device)){
                        //钢带条码校验--发送给工厂mes
                        miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".ScanerResult11").value(11).build());
                    } else if (Constants.OP100_2.equals(device)) {
                        //PET带条码校验--发送给工厂mes
                        miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".ScanerResult12").value(11).build());
                    else {
                        miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(11).build());
                        log.info("写入到工位{}的RecordDataDone数据：{}",device,11);
                    }
                }*/
                }else if (Constants.TWO.equals(valueString)){//出站
                    //分段010-065段
                    if (Constants.OP010.equals(device)){
                        //010工位无过站记录，只给放行信号
                        miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(21).build());
                        log.info("写入到工位{}的RecordDataDone数据：{}",device,21);
                    }else if (Constants.OP020_OP090.contains(device)){
                        Integer result = 21;
                        //读取电芯码
                        List<String> cellCodeList = readCellCodeList(thoroughfare, device);
                        if(ObjectUtil.isNull(cellCodeList) || cellCodeList.size() != 4){
                            result = 23;
                        }else{
                            result = savePassingStation(thoroughfare, device,cellCodeList);//保存过站
                            if(result == 21) {
                                result = saveParamCollection(thoroughfare, device,cellCodeList);//保存参数，发送工厂MES
                            }
                        }
                        miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(result).build());
                        log.info("写入到工位{}的RecordDataDone数据：{}",device,result);
                    } else if (Constants.OP100_OP150.contains(device)){//人工工位
                        WebSocketUsers.sendMessageToUserByText(map.get(device), "END");
                    } else {
                        Integer result = 21;
                        Object productTypeObjcet = miloService.readFromOpcUa(thoroughfare + "." + device + ".ProductType").getValue();//产品类型
                        Object modulCodeObjcet = miloService.readFromOpcUa(thoroughfare + "." + device + ".ModuleCode").getValue();
                        if (ObjectUtil.isNull(modulCodeObjcet)){
                            result = 23;
                        }else{
                            String moduleCode = modulCodeObjcet.toString();
                            result = savePassingStation(thoroughfare, device,moduleCode);//保存过站
                            if(result == 21) {
                                result = saveParamCollection(thoroughfare, device,moduleCode);//保存参数，发送工厂MES
                            }
                        }
                        miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(result).build());
                        log.info("写入到工位{}的RecordDataDone数据：{}",device,result);
                    }
                }
            }
        } catch (Exception e) {
        }catch (Exception e) {
            log.error(e.getMessage());
            System.out.println(e.getMessage());
            log.info(e.getMessage());
        }
    }

    public void receivingWorkOrders(String thoroughfare ,String device)
    {
        String paramProductNum = "";
@@ -516,9 +516,9 @@
                    parentVO.setProductNum(moduleCode);
                    parentVO.setCheckList(mesList);

                    log.info("执行工厂MES方法start，传入数据：{}",parentVO);
                    log.info("执行工厂MES方法start，工位号{} 传入数据：{}",device ,parentVO);
                    HttpResponse execute = HttpRequest.post(Constants.FACTORY_EMS_UAT_RUL+"deviceResultFeedback").body(JSONUtil.toJsonStr(parentVO)).execute();
                    log.info("执行工厂MES方法end，返回数据：{}",execute.body());
                    log.info("执行工厂MES方法end，工位号{} 返回数据：{}",device,execute.body());

                });
            }
@@ -595,10 +595,10 @@

                        //发送给工厂mes参数封装
                        ChildVO childVO = new ChildVO();
                        childVO.setItemCode(confColl1.get(i).getCollectParameterName());//参数
                        childVO.setItemCode(confColl1.get(i).getCollectParameterId());//参数
                        childVO.setItemType(confColl1.get(i).getItemType());
                        childVO.setItemValue(paramValue);//参数值
                        childVO.setItemText(confColl1.get(i).getParameterSetName());
                        childVO.setItemText(confColl1.get(i).getCollectParameterName());
                        childVO.setCheckResult("1");
                        childVO.setCheckTime(format.format(new Date()));
                        mesChildList1.add(childVO);
@@ -623,10 +623,10 @@

                        //发送给工厂mes参数封装
                        ChildVO childVO = new ChildVO();
                        childVO.setItemCode(confColl2.get(i).getCollectParameterName());//参数
                        childVO.setItemCode(confColl2.get(i).getCollectParameterId());//参数
                        childVO.setItemType(confColl2.get(i).getItemType());
                        childVO.setItemValue(paramValue);//参数值
                        childVO.setItemText(confColl2.get(i).getParameterSetName());
                        childVO.setItemText(confColl2.get(i).getCollectParameterName());
                        childVO.setCheckResult("1");
                        childVO.setCheckTime(format.format(new Date()));
                        mesChildList2.add(childVO);
@@ -649,10 +649,10 @@

                        //发送给工厂mes参数封装
                        ChildVO childVO = new ChildVO();
                        childVO.setItemCode(confColl3.get(i).getCollectParameterName());//参数
                        childVO.setItemCode(confColl3.get(i).getCollectParameterId());//参数
                        childVO.setItemType(confColl3.get(i).getItemType());
                        childVO.setItemValue(paramValue);//参数值
                        childVO.setItemText(confColl3.get(i).getParameterSetName());
                        childVO.setItemText(confColl3.get(i).getCollectParameterName());
                        childVO.setCheckResult("1");
                        childVO.setCheckTime(format.format(new Date()));
                        mesChildList3.add(childVO);
@@ -675,10 +675,10 @@

                        //发送给工厂mes参数封装
                        ChildVO childVO = new ChildVO();
                        childVO.setItemCode(confColl4.get(i).getCollectParameterName());//参数
                        childVO.setItemCode(confColl4.get(i).getCollectParameterId());//参数
                        childVO.setItemType(confColl4.get(i).getItemType());
                        childVO.setItemValue(paramValue);//参数值
                        childVO.setItemText(confColl4.get(i).getParameterSetName());
                        childVO.setItemText(confColl4.get(i).getCollectParameterName());
                        childVO.setCheckResult("1");
                        childVO.setCheckTime(format.format(new Date()));
                        mesChildList4.add(childVO);
@@ -708,10 +708,10 @@

                                //发送给工厂mes参数封装
                                ChildVO childVO = new ChildVO();
                                childVO.setItemCode(confColl0.get(j).getCollectParameterName());//参数
                                childVO.setItemCode(confColl0.get(j).getCollectParameterId());//参数
                                childVO.setItemType(confColl0.get(j).getItemType());
                                childVO.setItemValue(paramValue);//参数值
                                childVO.setItemText(confColl0.get(j).getParameterSetName());
                                childVO.setItemText(confColl0.get(j).getCollectParameterName());
                                childVO.setCheckResult("1");
                                childVO.setCheckTime(format.format(new Date()));
                                mesChildList0.add(childVO);