修改

hdy

2025-03-17 9ecf2257e5cbe2c45a3adae4a56531e5065b5e5a

 billion-main/src/main/java/com/billion/main/plcServer/sub/OPCUaSubscription.java

@@ -99,7 +99,7 @@
                    if(Constants.ONLINE.contains(device)){
                        miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(11).build());
                    }
                    //除首工站所有工站
                    //1.2//除首工站所有工站
                    else if(
                            Constants.PLC1.contains(device) ||
                            Constants.PLC2.contains(device) ||
@@ -148,10 +148,22 @@
                        omOrderScheduling.setStatus("1");
                        //托盘绑定SFCCode和工单和产线
                        if(Constants.OP005.equals(device)){
                            omProductionOrderInfoService.updateBodyStatus1();
                            omOrderScheduling.setRemarks("Body");
                            sysCountService.updateSerialNumber();
                            OmProductionOrderInfo getBodyOrder2 = omProductionOrderInfoService.getBodyOrder();
                            if (Objects.equals(getBodyOrder2.getBodyQty(), getBodyOrder2.getPlanQty())){
                                omProductionOrderInfoService.updateBodyStatus2();
                            }
                        }
                        if(Constants.C005.equals(device)){
                            omProductionOrderInfoService.updateHeadStatus1();
                            omOrderScheduling.setRemarks("Head");
                            sysCountService.updateHeadNumber();
                            OmProductionOrderInfo getHeadOrder2 = omProductionOrderInfoService.getHeadOrder();
                            if (Objects.equals(getHeadOrder2.getHeadQty(), getHeadOrder2.getPlanQty())){
                                omProductionOrderInfoService.updateHeadStatus2();
                            }
                        }
                        omOrderSchedulingService.insertOmOrderScheduling(omOrderScheduling);
                    }else if(Constants.OFFLINE.contains(device)){
@@ -174,7 +186,7 @@
                                updateWrapper.set("head_status", "2");
                                omProductionOrderInfoService.update(new OmProductionOrderInfo(),updateWrapper);
                            }
                        } else if (Constants.OP310.equals(device)) {
                        } else if (Constants.OP300.equals(device)) {
                            omOrderScheduling.setRemarks("Body");
                            omOrderScheduling.setSfcCode(SFCCode.toString());
                            List<OmOrderScheduling> omOrderSchedulingList = omOrderSchedulingService.selectOmOrderSchedulingList(omOrderScheduling);
@@ -209,7 +221,29 @@
                            updateWrapper.set("pre_status", "2");
                            omProductionOrderInfoService.update(new OmProductionOrderInfo(),updateWrapper);
                        }
                        sysCountService.updatePreNumber();
                        omProductionOrderInfoService.updatePreStatus1();
                        OmProductionOrderInfo getPreOrder2 = omProductionOrderInfoService.getPreOrder();
                        if (Objects.equals(getPreOrder2.getPreQty(), getPreOrder2.getPlanQty())){
                            omProductionOrderInfoService.updatePreStatus2();
                        }
                    }
                    //出站保存
                    DaStationCollection daStationCollection = new DaStationCollection();
                    daStationCollection.setLocationCode(device);
                    daStationCollection.setSfcCode(SFCCode.toString());
                    Object StationStatus = miloService.readFromOpcUa(thoroughfare + "." + device + ".StationStatus").getValue();
                    Date startTime = new Date();
                    ReadWriteEntity startTimeRead = miloService.readFromOpcUa(thoroughfare + "." + device + ".StartTime");//进站时间
                    startTime = format.parse(TimeUtil.test(TimeUtil.stringProcessing(startTimeRead.getValue().toString())));
                    daStationCollection.setInboundTime( startTime);
                    Date stopTime = new Date();
                    ReadWriteEntity stopTimeRead = miloService.readFromOpcUa(thoroughfare + "." + device + ".StopTime");//进站时间
                    stopTime = format.parse(TimeUtil.test(TimeUtil.stringProcessing(stopTimeRead.getValue().toString())));
                    daStationCollection.setOutboundTime( stopTime);
                    daStationCollection.setStatus(StationStatus.toString());
                    daStationCollectionService.insertDaStationCollection(daStationCollection);
                    miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(21).build());
                    //查询descriptive字段等于1的采集项保存到扫码保存到da_material_collection表里
                    DaCollectionParamConf daCollectionParamConf1 = new DaCollectionParamConf();
                    daCollectionParamConf1.setProcessesCode(device);
@@ -217,7 +251,6 @@
                    List<DaCollectionParamConf> daCollectionParamConfList1 = daCollectionParamConfService.selectDaCollectionParamConfList(daCollectionParamConf1);
                    for (DaCollectionParamConf conf : daCollectionParamConfList1) {
                        String gatherAddress = conf.getGatherAddress();

                        String valueObj = null;
                        ReadWriteEntity entity = miloService.readFromOpcUa(gatherAddress);
                        if (entity != null) {
@@ -266,21 +299,6 @@
                            log.debug("采集项为空: {}", gatherAddress);
                        }
                    }
                    DaStationCollection daStationCollection = new DaStationCollection();
                    daStationCollection.setLocationCode(device);
                    daStationCollection.setSfcCode(SFCCode.toString());
                    Object StationStatus = miloService.readFromOpcUa(thoroughfare + "." + device + ".StationStatus").getValue();
                    Date startTime = new Date();
                    ReadWriteEntity startTimeRead = miloService.readFromOpcUa(thoroughfare + "." + device + ".StartTime");//进站时间
                    startTime = format.parse(TimeUtil.test(TimeUtil.stringProcessing(startTimeRead.getValue().toString())));
                    daStationCollection.setInboundTime( startTime);
                    Date stopTime = new Date();
                    ReadWriteEntity stopTimeRead = miloService.readFromOpcUa(thoroughfare + "." + device + ".StopTime");//进站时间
                    stopTime = format.parse(TimeUtil.test(TimeUtil.stringProcessing(stopTimeRead.getValue().toString())));
                    daStationCollection.setOutboundTime( stopTime);
                    daStationCollection.setStatus(StationStatus.toString());
                    daStationCollectionService.insertDaStationCollection(daStationCollection);
                    miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".RecordDataDone").value(21).build());
                }
            }
        }
@@ -317,7 +335,6 @@
                                String SFCCode = A1 + A2 + A3+ A4 + A5;
                                miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".SFCCode").value(SFCCode).build());
                                miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".MESSFCCode").value(SFCCode).build());
                                sysCountService.updateSerialNumber();
                            }else{
                                sysCountService.clean();
                                sysCountService.updateYear();
@@ -329,7 +346,6 @@
                                String SFCCode = A1 + A2 + newA3+ A4 + A5;
                                miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".SFCCode").value(SFCCode).build());
                                miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".MESSFCCode").value(SFCCode).build());
                                sysCountService.updateSerialNumber();
                            }
                            // 更新 WorkOrderRequestDone 地址块
                            BsBomChildInfo bsbomChildInfo= new BsBomChildInfo();
@@ -337,13 +353,13 @@
                            bsbomChildInfo.setBomCode(getBodyOrder.getWorkOrderNo());
                            //发下工艺配方
                            formula(thoroughfare, device, bsbomChildInfo);
                            omProductionOrderInfoService.updateBodyStatus1();
//                          omProductionOrderInfoService.updateBodyStatus1();
                            //判断缸体工单完成
                            OmProductionOrderInfo getBodyOrder2 = omProductionOrderInfoService.getBodyOrder();
                            if (Objects.equals(getBodyOrder2.getBodyQty(), getBodyOrder2.getPlanQty())){
                                omProductionOrderInfoService.updateBodyStatus2();
                            }
                            String PalletID = getBodyOrder2.getBodyQty().toString();
//                            OmProductionOrderInfo getBodyOrder2 = omProductionOrderInfoService.getBodyOrder();
//                            if (Objects.equals(getBodyOrder2.getBodyQty(), getBodyOrder2.getPlanQty())){
//                                omProductionOrderInfoService.updateBodyStatus2();
//                            }
                            String PalletID = String.valueOf(getBodyOrder.getBodyQty() + 1);
                            miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".PalletID").value(PalletID).build());
                            miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".WorkOrderRequestDone").value(11).build());
                    }
@@ -370,7 +386,6 @@
                            String SFCCode = A1 + A2 + A3+ A4 + A5;
                            miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".SFCCode").value(SFCCode).build());
                            miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".MESSFCCode").value(SFCCode).build());
                            sysCountService.updateHeadNumber();
                        }else{
                            sysCountService.clean();
                            sysCountService.updateYear();
@@ -382,7 +397,6 @@
                            String SFCCode = A1 + A2 + newA3+ A4 + A5;
                            miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".SFCCode").value(SFCCode).build());
                            miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".MESSFCCode").value(SFCCode).build());
                            sysCountService.updateHeadNumber();
                        }
                        // 更新 WorkOrderRequestDone 地址块
                        BsBomChildInfo bsbomChildInfo= new BsBomChildInfo();
@@ -390,13 +404,13 @@
                        bsbomChildInfo.setBomCode(getHeadOrder.getWorkOrderNo());
                        //发下工艺配方
                        formula(thoroughfare, device, bsbomChildInfo);
                        omProductionOrderInfoService.updateHeadStatus1();
//                        omProductionOrderInfoService.updateHeadStatus1();
                        //判断缸体工单完成
                        OmProductionOrderInfo getHeadOrder2 = omProductionOrderInfoService.getHeadOrder();
                        if (Objects.equals(getHeadOrder2.getHeadQty(), getHeadOrder2.getPlanQty())){
                            omProductionOrderInfoService.updateHeadStatus2();
                        }
                        String PalletID = getHeadOrder2.getHeadQty().toString();
//                        OmProductionOrderInfo getHeadOrder2 = omProductionOrderInfoService.getHeadOrder();
//                        if (Objects.equals(getHeadOrder2.getHeadQty(), getHeadOrder2.getPlanQty())){
//                            omProductionOrderInfoService.updateHeadStatus2();
//                        }
                        String PalletID = String.valueOf(getHeadOrder.getHeadQty() + 1);
                        miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".PalletID").value(PalletID).build());
                        miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".WorkOrderRequestDone").value(11).build());
                    }
@@ -422,7 +436,6 @@
                            String SFCCode = A1 + A2 + A3+ A4 + A5;
                            miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".SFCCode").value(SFCCode).build());
                            miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".MESSFCCode").value(SFCCode).build());
                            sysCountService.updatePreNumber();
                        }else{
                            sysCountService.clean();
                            sysCountService.updateYear();
@@ -434,7 +447,6 @@
                            String SFCCode = A1 + A2 + newA3+ A4 + A5;
                            miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".SFCCode").value(SFCCode).build());
                            miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".MESSFCCode").value(SFCCode).build());
                            sysCountService.updateHeadNumber();
                        }
                        // 更新 WorkOrderRequestDone 地址块
                        BsBomChildInfo bsbomChildInfo= new BsBomChildInfo();
@@ -442,13 +454,13 @@
                        bsbomChildInfo.setBomCode(getPreOrder.getWorkOrderNo());
                        //发下工艺配方
                        formula(thoroughfare, device, bsbomChildInfo);
                        omProductionOrderInfoService.updatePreStatus1();
//                        omProductionOrderInfoService.updatePreStatus1();
                        //判断缸体工单完成
                        OmProductionOrderInfo getPreOrder2 = omProductionOrderInfoService.getPreOrder();
                        if (Objects.equals(getPreOrder2.getPreQty(), getPreOrder2.getPlanQty())){
                            omProductionOrderInfoService.updatePreStatus2();
                        }
                        String PalletID = getPreOrder2.getPreQty().toString();
//                        OmProductionOrderInfo getPreOrder2 = omProductionOrderInfoService.getPreOrder();
//                        if (Objects.equals(getPreOrder2.getPreQty(), getPreOrder2.getPlanQty())){
//                            omProductionOrderInfoService.updatePreStatus2();
//                        }
                        String PalletID = String.valueOf(getPreOrder.getPreQty() + 1);
                        miloService.writeToOpcUa(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".PalletID").value(PalletID).build());
                        miloService.writeToOpcShort(ReadWriteEntity.builder().identifier(thoroughfare + "." + device + ".WorkOrderRequestDone").value(11).build());
                    }